Cart
0
Description
Take control of your card condition with this dedicated edge and surface tool. Whether you are dealing with a card fresh out of the pack with a rough corner or restoring an older piece for your binder, this tool helps you tidy up imperfections.
Its ergonomic design allows for steady, non-abrasive pressure, making it the ideal instrument for flattening raised edges and correcting small dings on the front or back of your cards. A must-have for the hands-on hobbyist.
Disclaimer
We are not responsible for how you use this tool or the results you get. Card maintenance involves risk, and any damage caused to your cards during use is your sole responsibility. We strongly recommend practising on low-value bulk cards to master the technique before using this tool on your main collection.
Mender Tool - Directions for Use
The Mender Tool is ideal for working out dents, indents, lifted edges, and bent corners on Pokemon cards without scratching or marking the surface.
For Dents and Indents:
Place your card inside a penny sleeve for protection. For best results, lightly introduce moisture to the card first by breathing through a straw directed at the affected area, or use a humidor to gently hydrate the card. Once the card is slightly humid, use the Mender Tool to apply light circular or spiral pressure over the dented area, working from the center of the indent outward. Use steady, controlled strokes and avoid pressing too hard, as excessive pressure can cause unwanted glossiness on the card's surface.
For Lifted Edges and Corners:
Breathe gently through a straw onto the lifted edge while the card is sleeved, then use the Mender Tool to smooth the edge back down with soft, straight strokes. For extra protection on valuable cards, place a second sleeve over the top of the sleeved card before applying the tool.
For Bends:
After humidifying the card, sleeve it and place a second sleeve on top. Glide the Mender Tool in straight, even passes along the affected area using light circular motions until the card lays flat.
Tips:
Always practice on lower-value cards first. Less is more - start with minimal moisture and light pressure, repeating sessions gradually rather than forcing the repair in one go. Pokemon cards have unique layered materials, so a gentle, patient approach will always yield the best results.